Meanwell XLG-50I-A Power Supply

Nguồn Meanwell XLG-50I-A

Tính Năng:

• Constant power mode output
• Metal housing design with Functional Ground
• Built-in active PFC function
• Power supply block 2
• No load / Standby power consumption <0.5W
• IP67 rating for indoor or outdoor installation
• Optional function: adjust output via potentiometer; 3 in 1 dimming function (Dimming to off and Isolation design)
• Typical life > 50000 hours

Các Ứng Dụng:

• LED Street Lights
• LED Architectural Lighting
• LED Bay Lights
• LED lighting
• Enter “HL” for use in a Class I, Division 2 (Classified) hazardous location.

Mô Tả về sản phẩm

XLG-50 series is 50W AC/DC LED driver with constant power mode output. XLG-50 operates from 90 ~ 305VAC. Thanks to high efficiency up to 90%. The whole series can work in wide case temperature range -40⁰C ~ 90⁰C with air convection. The metal housing design and the IP67 level of ingress protection make this series suitable for both indoor and outdoor applications. The XLG-50 is equipped with various functional options, such as dimming methods, to provide optimal design flexibility for LED lighting. The XLG-50 series complies with the latest version of international safety regulations IEC61347/GB7000.1-2015 and UL8750. The output and dimmer circuit are also fully matched with the new isolation to ensure the safety of both the user and the lighting during installation.

Thông số chi tiết về sản phẩm

Model		XLG-50I-A
OUPUT	RATED CURRENT	1A
	CONSTANT CURRENT REGION	22 ~ 54V
	RATED POWER	100VAC ~ 305VAC
	RATED POWER	50W
	CURRENT RIPPLE	5.0% max. @rated current
	OPEN CIRCUIT VOLTAGE (max.)	57V
	CURRENT ADJ.RANGE	0.53 ~ 2.1A
	SETUP, RISE TIME	500ms, 100ms/115VAC, 230VAC
INPUT	VOLTAGE RANGE Note.4	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ full load (Please refer to “Power Factor Characteristic” section)
	TOTAL HARMONIC DISTORTION	THD<10% (@ load≥50% at 115VAC/230VAC; @ load≥75% /277VAC ) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)	90%
	AC CURRENT (Typ.)	0.57A/ 115VAC 0.29A/ 230VAC 0.24A/ 277VAC
	INRUSH CURRENT (Typ.)	COLD START 50A(tiwdth=350µs measured at 50% lpeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
	MAX. No. of PSUs on 16A CIRCUIT BREAKER
	NO LOAD / STANDBY POWER CONSUMPTION	No load power consumption <0.5W for A,<0.75W for I series Standby power consumption <0.5W for AB-type(Dimming OFF)