Meanwell TS-1000-248F Power Supply

Nguồn Meanwell TS-1000-248F

Tính Năng:

• True sine wave output (THD<3%)
• High surge power up to 2000W
• High efficiency up to 92%
• Power ON-OFF switch
• Standby saving mode can be selected
• Front panel indicator for operation status
• Built-in remote ON-OFF control function
• Protections: Bat. low alarm / Bat. low shutdown/ Over voltage / Over temp. / Output short / Input reverse polarity/ Overload
• Application: Home appliance, power tools, office and portable equipment, vehicle and yacht …etc.

Thông số chi tiết về sản phẩm

Model		TS-1000-112□	TS-1000-124□	TS-1000-148□	TS-1000-212□	TS-1000-224□	TS-1000-248□
OUPUT	RATED POWER	1000W
	MAXIMUM OUTPUT POWER	1050W for 180sec. / 1500W for 10sec. / surge power 2000W for 30 cycles
	AC VOLTAGE	Factory setting set at 110VAC			Factory setting set a 230VAC
		100 / 110 / 115 / 120VAC selectable by setting button S.W			200 / 220 / 230 / 240VAC selectable by setting butt S.W
	FREQUENCY Note.8	60±0.1Hz 50/60Hz selectable by setting button			50±0.1Hz 50/60Hz selectable by setting button
	WAVEFORM Note.6	True sine wave (THD<3%)
	AC REGULATION	±3.0%
	SAVING MODE(Typ.)	Default disabled. Load ≤5W will be changed to standby mode
	FRONT PANEL INDICATOR	Battery voltage level, output load level, saving mode, fault and operation status
INPUT	BAT. VOLTAGE	12V	24V	48V	12V	24V	48V
	VOLTAGE RANGE (Typ.) Note.3	10.5 ~ 15VDC	21 ~ 30VDC	42 ~ 60VDC	10.5 ~ 15VDC	21 ~ 30VDC	42 ~ 60VDC
	DC CURRENT (Typ.)	100A	50A	25A	100A	50A	25A
	NO LOAD CURRENT DRAW (Typ.)	≤6W @ standby saving mode
	OFF MODE CURRENT DRAW	≤1mA
	EFFICIENCY (Typ.) Note.1	88%	89.00%	90%	90%	91.00%	92%
	BATTERY TYPES	Open & sealed Lead Acid
BATTERY INPUT PROTECTION	FUSE	40A*4	40A*2	20A*2	40A*4	40A*2	20A*2
	BAT. LOW ALARM	11.3±4%	22.5±4%	45±4%	11.3±4%	22.5±4%	45±4%
	BAT. LOW SHUTDOWN	10.5±4%	21±4%	42±4%	10.5±4%	21±4%	42±4%
	BAT. POLARITY	By internal open
OUTPUT PROTECTION	OVER TEMPERATURE	90⁰C ± 5⁰C			70 ± 5⁰C
		Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode
	OUTPUT SHORT	Protection type : Shut down o/p voltage, re-power on to recover
	OVER LOAD (Typ.)	105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
		Protection type : Shut down o/p voltage, re-power on to recover
	GFCI PROTECTION	Optional (Only type F)			None