Meanwell SE-1000-48 Power Supply

Nguồn Meanwell SE-1000-48

Tính Năng:

● AC input active surge current limiting
● AC input range selected by switch
● Protections : Short circuit / Overload / Over voltage / Over temperature
● Forced air cooling by built-in DC ball bearing fan
● High power density 7.3w/in³
● With DC_OK signal ouput
● Built-in remote ON-OFF control
● Built-in remote sense function
● UL/CUL approved
● Low cost

Thông số chi tiết về sản phẩm

Model		SE-1000-5	SE-1000-9	SE-1000-12	SE-1000-15	SE-1000-24	SE-1000-48
OUPUT	DC VOLTAGE	5V	9V	12V	15V	24V	36V
	RATED CURRENT	150A	100A	83.3A	66.7A	41.7A	20.8A
	CURRENT RANGE	0 ~ 150A	0 ~ 100A	0 ~ 83.3A	0 ~ 66.7A	0 ~ 41.7A	0 ~ 20.8A
	RATED POWER	750W	900W	999.6W	1000.5W	1000.8W	998.4W
	RIPPLE & NOISE (max.) Note.2	150mVp-p	200mVp-p	150mVp-p	150mVp-p	200mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	3.3 ~ 5.5V	7.5 ~ 10V	10 ~ 13.5V	13.5 ~ 16.5	22 ~ 27.5V	43 ~ 56V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.5%
	LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	1500ms, 50ms/230VAC 1500ms,50ms/115VAC at full load
	HOLD UP TIME (Typ.)	20ms/230VAC 15ms/115VAC at full load
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	81%	84%	85%	86%	88%	89%
	AC CURRENT (Typ.)	17.5A/115VAC 10A/230VAC
	INRUSH CURRENT (Typ.)	35A/115VAC 55A/230VAC
	LEAKAGE CURRENT	<2.5mA / 240VAC
PROTECTION	OVER LOAD	105 ~ 150% rated output power
	OVER LOAD	Protection type : Shut down O/P voltage, re-power on to recover
	OVER VOLTAGE	5.75 ~ 6.3V	13.8 ~ 16.2V	18 ~ 21V	27.6 ~ 32.4V	31 ~ 36.5V	42 ~ 50V
	OVER VOLTAGE	Protection type : Shut down O/P voltage, re-power on to recover
	OVER TEMPERATURE	70⁰C±5⁰C (TSW1) detect on heatsink of power transistor
	OVER TEMPERATURE	Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
FUNCTION	DC_OK SIGNAL	PSU turn on: 3.3V ~ 5.6V PSU turn off:0 ~ 1V
FUNCTION	REMOTE CONTROL	RC+/RC-: 0 ~ 8V power on; 4 ~ 10V power off
ENVIRONMENT	WORKING TEMP.	20 ~ +60⁰C (Refer to “Derating curve”)
	WORKING HUMIDITY	20 ~ 90% RH non- condensing
	STORAGE TEMP., HUMIDITY	40 ~ +85⁰C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.05%/⁰C (0 ~ 50⁰C)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes