Meanwell PWM-60-24TY1 Power Supply

Nguồn Meanwell PWM-60-24TY1

Tính Năng:

• Risk-free constant voltage PWM output with frequency up to 4KHz IEEE1789-2015 compliant
• Bluetooth mesh dimming function
• Plastic housing with class II design
• Built-in active PFC function
• Power supply block 2
• Fully encapsulated with IP67 . rating
• Typical life > 50000 hours

Các Ứng Dụng:

• LED lighting strip
• Indoor LED lights
• Decorative LED lights
• LED Architectural Lighting
• Enter “HL” for use in hazardous (Classified) Class I, Division 2 locations.
• Smart lighting control

Mô Tả về sản phẩm

PWM-60 IoT series is a constant voltage mode AC/DC 60W LED driver with PWM style output, which can maintain uniform color temperature and brightness when driving all kinds of LED strips. PWM-60 IoT operates from 90~305VAC and offers models with different rated voltages between 12V and 48V. Thanks to high efficiency up to 90%, with fanless design, the whole series can operate in case temperature of -20⁰C ~ + 90⁰C under the condition of free air convection. PWM-60 IoT can provide as little as 0.4% dimming which is suitable for low-light applications such as cinemas. Output frequencies up to 4KHz comply with IEEE1789-2015 without risk, providing a great solution to health concerns caused by flickering.

Thông số chi tiết về sản phẩm

Model		PWM-60-12	PWM-60-24	PWM-60-48
OUPUT	DC VOLTAGE	12V	24V	48V
	RATED CURRENT	10A	5A	2.5A
	RATED POWER	120W	120W	120W
	PWM FREQUENCY (Typ.)	up to 4kHz
	SETUP, RISE TIME Note.2 Note.9	1000ms, 80ms / 115VAC or 230VAC for BLE and TY1 ; 2000ms, 80/115VAC or 230VAC for SVA
	HOLD UP TIME (Typ.)	16ms/115 or 230VAC
INPUT	VOLTAGE RANGE Note.2	90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR (Typ.)	PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ full load (Please refer to “Power Factor Characteristic” curve)
	TOTAL HARMONIC DISTORTION	THD<20% (@ load≥60% at 115VAC/230VAC; @ load≥75% at 277VAC ) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
	EFFICIENCY (Typ.)	86.00%	89.00%	90.00%
	AC CURRENT (Typ.)	0.8A/ 115VAC 0.4A/ 230VAC 0.32A/ 277VAC
	INRUSH CURRENT (Typ.)	COLD START 50A(tiwdth=270µs measured at 50% lpeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC

	STANDBY POWER CONSUMPTION	<1W